Xbox Stick Calibrator for Android
Permanently recalibrate Xbox Series X|S controller thumbsticks from your phone. Free, no account, no ads.
Scan to open on your phone
Install
- Tap Download APK, then open the downloaded file.
- If Android asks, allow installs from your browser or Files app.
- Play Protect may warn about an unknown developer: tap More details → Install anyway. It warns because this app isn't from the Play Store.
Use
- Update the controller's firmware first (Xbox Accessories app or the console). It needs 5.19.3221.0 or later.
- Plug the controller into the phone with a USB-C data cable. When Android asks to open Xbox Stick Calibrator, tap OK.
- Tap Connect controller, then Check (read-only). It shows the firmware and the stored calibration and changes nothing.
- Tap Calibrate. Turn each stick slowly at the edge, about 6 times clockwise then 6 anticlockwise, until it says Done.
- Let go when asked. Unplug it and connect the next controller. The log can be copied or shared as CSV.
Before you calibrate
- Calibrating erases each stick's stored calibration as soon as it starts. Finish every step. If you stop part-way, the controller uses its defaults until you calibrate it again.
- Calibration fixes a stick whose centre has shifted. It can't fix a worn stick part: if a stick is still well off centre afterwards, it needs replacing.
- Not tested on every phone yet. If Connect shows an error, the Xbox console's own thumbstick calibration does the same job.
What it does
It sends the same calibration commands as Microsoft's Xbox Accessories app. The controller saves the result in its own memory, so the fix stays when you use it on a console or PC. The app takes the controller from Android's built-in gamepad driver while it works, then hands it back when you unplug.
Check your download
SHA-256 of XboxStickCalibrator.apk:
1778aaa3418846de125604b15321b5be495755fb117e299ca4d8536f0da6479d